The effect of synthesis gas composition on the Fischer–Tropsch synthesis over Co/γ-Al2O3 and Co–Re/γ-Al2O3 catalysts

The Fischer–Tropsch synthesis over Co/γ-Al₂O₃ and Co–Re/γ-Al₂O₃ was investigated in a fixed-bed reactor at 20 bar and 483 K using feed gases with molar H₂/CO ratios of 2.1, 1.5 and 1.0 simulating synthesis gas derived from biomass. With lower H₂/CO ratios in the feed, the CO conversion and the CH₄ selectivity decreased, while the C₅₊ selectivity and olefin/paraffin ratio for C₂–C₄ increased slightly. The water–gas shift activity was low for both catalysts, resulting in high molar usage ratios of H₂/CO (close to 2.0), even at the lower inlet ratios (i.e. 1.5 and 1.0). For both catalysts, the drop in the production rate of hydrocarbons when shifting from an inlet ratio of 2.1 to 1.5 was significant mainly because the H₂/CO usage ratio did not follow the change in the inlet ratio. The hydrocarbon selectivities were rather similar for inlet H₂/CO ratios of 2.1 and 1.5, while significantly deviating from those for an inlet ratio of 1.0. With the studied catalysts, it is possible to utilize the advantages of an inlet ratio of 1.0 (higher selectivity to C₅₊, lower selectivity to CH₄, no water–gas shifting of the bio-syngas needed prior to the FT reactor) if a low syngas conversion is accepted.     

Credible sets for risk ratios in over-reported two-sample binomial data using the double-sampling scheme

We consider point and interval estimation for risk ratios based on two independent samples of binomial data subject to false positive misclassification. For such data it is well known that the model is unidentifiable. We consider incorporating training data obtained by using a double-sampling scheme to make the model identifiable. In this identifiable model, we propose a Bayesian method to make statistical inferences. In particular, we derive an easy-to-implement closed-form algorithm for drawing from the posterior distributions. The algorithm is illustrated using a real data example and further examined via Monte Carlo simulation studies.     

The Added Value of Understanding Informal Social Networks in an Adaptive Capacity Assessment: Explorations of an Urban Water Management System in Indonesia

Social networks play an important role in environmental governance regimes, and they are a key to the adaptive capacity of systems that deal with complex, contextual and multi-faceted issues. Urban water systems are typical examples of complex systems facing many pressures, such as increased population, water quality deterioration, and climate change. This paper explores social networks of the key stakeholders engaged in urban water management, in Makassar City, Indonesia, in the context of exploring ways to improve management of an increasingly complex urban water system. Three social networks were explored; those constituted by formal and informal interactions and networks perceived by stakeholders to be “ideal”. Formal networks were identified through an examination of the legislative instruments and government agencies’ documents relating to water provision in Makassar, while the informal and “ideal” networks were investigated in collaboration with the stakeholders. The research found that the informal social network was more extensive than were the formally required networks, and the investigation of informal networks created a potentially more robust and adaptive water management system than would have occurred through inclusion of formal institutional arrangements. We suggest that in examination of the adaptive capacity of an urban water system, one also considers the informal arrangements and linkages, as this additional information about the system is necessary to enhance our understanding of potential adaptation of water management and improved urban water systems.     

The stability of vitamin A in fortified palm olein during extended storage and thermal treatment

The stability of vitamin A in Refined Bleached Deodorised Palm Olein (RBDPOL) was studied for 24 months. Vitamin A decreased with time, temperature and thermal treatment (frying/cooking). RBDPOL fortification was observed over several temperature ranges, using PET, nylon and HDPE commercial packaging materials. After 24 months, the following vitamin A contents of 39–43 IU g^?1 (39–45%) at 16–20 °C; 35–40 IU g^?1 (43–49%) at 24–29 °C; and 28–39 IU g^?1 (45–73%) at 24–45 °C were detected at the respective temperature ranges. Results showed stability of vitamin A fortified RBDPOL vegetable oil was not stable over typical shelf life (12 months). Depletion of vitamin A accelerated when the RBDPOL vegetable oil was subjected to high temperature thermal treatment.     

Screening for lipid depositor of Indonesian microalgae isolated from seashore and peat-land

The screening for finding the lipid producer of indigenous Indonesian tropical microalgae that obtained from peat-land at Riau, Sumatra and seashore at Lombok has carried out. Preliminary screening was done by selection on faster growing algae from 44 (forty-four) isolates. 10 (ten) isolates were chosen for further analysis. Out of 10 selected isolates shows that five isolates have indication rapid growth and high content of lipid, furthermore those chose isolates were observed comprehensively, namely LIPI11-2-Al005, LIPI11-2-Al010, LIPI11-2-Al015, LIPI11-2-Al018, and LIPI11-2-Al019. The microalgae are belong to the eukaryotic microalgae and its seem to be closed to Chlorophytes that has cell nuclear with an envelope, light green chloroplast, thick cell wall, round and elongated cell features. Cultivation of the microalgae in laboratory condition (1 L) has shown that lipid content was about 20–35% base in cell dry weight. The highest lipid content was found in the isolate LIPI11-2-Al018 of 30.74% per dry weight cell. LIPI11-2-A1018 therefore was test for scale up cultivation reach the culture volume of 5 L in the cylindrical photobioreactor, and expected to be source of triglycerides and lipids for biodiesel ingredient.     

Rehydration and Sensory Properties of Dehydrated Russet Potatoes (Solanum tuberosum) Using Microwave Vacuum,Heated Air,or Freeze Dehydration

Russet potatoes (Solanum tuberosum) dehydrated by microwave-vacuum (MVD), heated air (HAD), and freeze drying (FD) were compared by measuring color, texture, rehydration properties, and sensory properties. Scanning Electron Microscope (SEM) images were taken to observe cell damage in the dried potatoes. The MVD potatoes remained intact following rehydration and retained suitable textural and color properties based upon sensory evaluation. The FD potatoes became friable and lost color. Sensory panelists preferred MVD, FD, and HAD in that order. MVD can provide consumers with a dehydrated product that has characteristics similar to or better than those dried by HAD or FD.     

Graphical fault tree analysis for fatal falls in the construction industry

The current study applied a fault tree analysis to represent the causal relationships among events and causes that contributed to fatal falls in the construction industry. Four hundred and eleven work-related fatalities in the Taiwanese construction industry were analyzed in terms of age, gender, experience, falling site, falling height, company size, and the causes for each fatality. Given that most fatal accidents involve multiple events, the current study coded up to a maximum of three causes for each fall fatality. After the Boolean algebra and minimal cut set analyses, accident causes associated with each falling site can be presented as a fault tree to provide an overview of the basic causes, which could trigger fall fatalities in the construction industry. Graphical icons were designed for each falling site along with the associated accident causes to illustrate the fault tree in a graphical manner. A graphical fault tree can improve inter-disciplinary discussion of risk management and the communication of accident causation to first line supervisors.     

Oxygen vacancy levels on gadolinia-doped ceria interlayer deposited by atmospheric pressure plasma jet for solid oxide fuel cells

The oxygen vacancy levels as a factor on different gadolinia-doped ceria interlayer (GDCi) films deposited on yttria stabilized zirconia (YSZ) electrolyte substrates by an atmospheric pressure plasma jet (APPJ) via precursor solution of nitrate salts are investigated. Focusing on the effect of carrier gases, scanning electron microscopy (SEM), Raman, and X-ray diffraction (XRD) are implemented for the materials characterization of the as-deposited GDCi films and sintered-GDCi films at various temperatures. The higher level of oxygen vacancies in GDCi films adhered on 8YSZ electrolyte are evidently analyzed using Ar as the carrier gas during the deposition, of which the interdiffusion resulted in the formation of (GDC + YSZ) solid solution for sintering over 1300?°C degraded the total conductivity. The deposition of GDCi films on 8YSZ by APPJ method using O₂ carrier gas significantly improved the total conductivities of the whole electrolyte layers. Moreover, this study provides the useful insight into the oxygen vacancy levels on GDC films as interlayer (GDCi) to improve the values of open circuit voltage in LSM/GDCi/YSZ/Pt full-cell, as well as offering the efficiency of APPJ as one step deposition process.